Various X crashes under 2.3.41

[Joe Drew]

I compiled and ran 2.3.41 for the first time, and have been experiencing
some trouble with various X programs, including X itself, segfaulting.
This wasn't a problem under 2.2.14 - in fact I haven't seen segfaults
in some time, so I don't think it's faulty RAM or something like that.
However I did compile my kernel with (gcc -v:) gcc version 2.95.2 20000116 
(Debian GNU/Linux) - could this cause a problem? The only other thing I can
think of is the fact that I've got experimental support for my IDE chipset
compiled in (CONFIG_BLK_DEV_VIA82C586).
The crash of my X server is attached. Any ideas? (Please CC me as I'm
not on linux-kernel. Also I'm sending this to Xfree86 en XFree86.org as the X
server requested; I obey my free software. ;) Unfortunately I wasn't able
to capture the full output of my X server the first time through, so
I captured X 2> x.log and am including that too. As far as I can tell,
there was no coredump.)
------------ próxima parte ------------
Caught signal 11.

Server aborting...

eip: 080b3cdc   eflags: 00013286
eax: 082e4268   ebx: caaee805   ecx: 000000ed   edx: 0828ffd8
esi: 082e41b0   edi: 082ae628   ebp: bffffa4c   esp: bffffa14
Stack: 08348794 082e41b0 bffffa4c 0809c4be 082ae628 02400014 c0000001 00000002
       08348794 082e41b0 082ae628 05bf64a0 08348794 02000000 bffffa7c 080b43bc
       082e41b0 000000ed 000000ed 00000004 082ae628 00000000 bffffa94 00000000
       00000000 082906a8 bffffcac 080968d3 082ae628 00000020 bffffcac 0809695b

Call Trace: 0809c4be 080b43bc 080968d3 0809695b 080783b1 0806f7a5 080ba1e7
       080a53bd 080a5628 080a5314 0815f734 08096848 080a51e2 080a51fb 081b844c
       0806b1b0 0806b1d1 080a4d58 081b844c 0806b1b0

Code: 39 4b 04 75 ef 85 db 74 76 85 d2 75 1a 8b 56 78 8b 03 89 42
				   
------------ próxima parte ------------

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.13lvm_reiser i686 [ELF] 
Configured drivers:
  Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
(using VT number 8)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: IntelliMouse, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) Mach64: Graphics device ID: "ATI 3D Xpression+ PC2TV"
(**) Mach64: Monitor ID: "My Monitor"
(--) Mach64: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) Mach64: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) Mach64: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) Mach64: PCI: Mach64 GT rev 72, Aperture @ 0xe0000000, Block I/O @ 0x6100
(--) Mach64: PCI (Mach64 GT) and CONFIG_CHIP_ID (Mach64 VT) don't agree on ChipType,
	using PCI value
(--) Mach64: PCI (72) and CONFIG_CHIP_ID (0) don't agree on ChipRev,
	using PCI value
(--) Mach64: Card type: PCI
(--) Mach64: Memory type: EDO (3)
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 80.000 MHz
(**) Mach64: Mode "800x600": mode clock =  50.000
(**) Mach64: Mode "640x480": mode clock =  31.500
(**) Mach64: Mode "320x200": mode clock =  12.588
(--) Mach64: Virtual resolution: 800x600
(--) Mach64: Video RAM: 2048k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 16 MB aperture @ 0xe0000000
(--) Mach64: Ramdac is Internal
(--) Mach64: Ramdac speed: 80 MHz
(**) Mach64: Color weight: 565
(--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots
(--) Mach64: Font cache: 0 fonts
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'