Everyone Classic Hardware Crash (Re: 2.3.41-4 / hda: lost interrupt)

[Greg KH]

On Fri, Jan 28, 2000 at 10:20:57PM -0800, Andre Hedrick wrote:
> 
> On Fri, 28 Jan 2000, David Dyck wrote:
> 
> > On Fri, 28 Jan 2000, Andre Hedrick wrote:
> > 
> > > 
> > > What chipset and drive vendor?
> > > 
> > 
> > from dmesg....
> > 
> > Uniform Multi-Platform E-IDE driver Revision: 6.30
> > PIIX4: IDE controller on PCI bus 00 dev 39
> > PIIX4: not 100% native mode: will probe irqs later
> > hda: Maxtor 86480D6, ATA DISK drive
> > hdb: WDC AC32100H, ATA DISK drive
> > hdc: NEC CD-ROM DRIVE:28B, ATAPI CDROM drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: Maxtor 86480D6, 6149MB w/256kB Cache, CHS=784/255/63
> > hdb: WDC AC32100H, 2014MB w/128kB Cache, CHS=1023/64/63
> 
> Greetings David,
> 
> I am using you problem as the example for the world, You need to split the
> Maxtor WDC pair before you corrupt your FS!!!!
> 

With 2.3.41 I am now seeing this same problem all the time (the "hda
lost interrupt" message)
2.3.41-pre4 seems to work fine, and I know 2.3.41-pre2 worked well. My
drives are:

Uniform Multi-Platform E-IDE driver Revision: 6.30
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
hda: WDC AC26400R, ATA DISK drive
hdb: WDC WD136AA, ATA DISK drive
hdc: Memorex CDRW-2216, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC26400R, 6149MB w/512kB Cache, CHS=784/255/63
hdb: WDC WD136AA, 12971MB w/2048kB Cache, CHS=1653/255/63
hdc: ATAPI 16X CD-ROM CD-R/RW drive, 1024kB Cache
Uniform CD-ROM driver Revision: 3.06
Partition check:
 hda: hda1 hda2 hda3 < hda5 >
 hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdb3
Floppy drive(s): fd0 is 1.44M

I am not splitting any WDC drives. Is there any more information that I
can provide to help, or any suggestions on what to do? Should I just
split the two drives, one to each ide bus?

Right now I am living with 2.3.40, but that's a pain for my USB work...

Thanks,

greg k-h
greg en kroah.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo en vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/