hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

[Jean-Luc Coulon]

Hi,

I've _exactly_ the same problem when I try to setup DMA on my HDD (hdparm -d1
/dev/hda)

I had an Intel mainboard with a PCII "Triton" chipset. The disk was able to run
with DMA on this board.

I've changed for a motherboard with a VIA "Appolo" chipset. With this card, I've
the same problem as yours.

The 'VIA' driver is said as 'experimental', so I suspect this driver. I suspect
a lack in the functionalities of this driver.

I run kernel 2.3.40 but I've the same problem with 2.2.14. This is even worse in
2.2.14 : I experienced crashes of my system !!


Best regards

Jean-Luc

Konstandinos A. Saipas wrote:
> 
> Hi,
> 
> yesterday as I was browsing, Netscape stopped responding momentarily and
> when I was able to switch to syslog output I got the following:
> 
> Jan 25 07:01:10 saip kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> Jan 25 07:01:10 saip kernel: hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=21298099, sector=27972
> Jan 25 07:01:10 saip kernel: end_request: I/O error, dev 03:07 (hda), sector 27972
> Jan 25 07:01:17 saip kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> Jan 25 07:01:17 saip kernel: hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=21298099, sector=27974
> Jan 25 07:01:17 saip kernel: end_request: I/O error, dev 03:07 (hda), sector 27974
> 
> Is that a mean that I should prepare my badget for a new drive?
> Any comments or suggestions would be more than welcome.
> 
> TIA,
> 
> Konstandinos A. Saipas
> saipman en eexi.gr, k.saipas en westminster.ac.uk
> MSc Computer Networks & Communications @ University of Westminster.
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo en vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo en vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/