VFS: Disk change detected on device ide0(3,64)

Sab Ene 22 09:19:40 CST 2000

Que Tal Linux-00:

No suelo enviar correos grandes a la lista, pero en esta ocaciOn me tomo la
libertad por que, de plano, no hallE nisiquiera que HOWTO leer.

Uso: LinuxPPP 6.1 (GNOME/Enlightenment/Resolucion 1260x????)

Linux version 2.2.12-20 (root en porky.devel.redhat.com) (gcc version egcs-2.91.66 
Detected 233867806 Hz processor.
Console: colour VGA+ 80x34
Memory: 127668k/131072k available (1008k kernel code, 412k reserved, 1640k data,
64k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Klamath) stepping 04
hda: WDC WD84AA, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC WD84AA, 8063MB w/2048kB Cache, CHS=1027/255/63
hdb: ATAPI 24X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.56

Y resulta que cuando arranco el XWindow (init 5, por default) y entro como
'cualquier' usuario, mando ejecutar el 'dmesg' y me despliega al final una linea
que dice:

VFS: Disk change detected on device ide0(3,64)

y me manda 1 linea de esas cada 2 segundos, y cuando dejo la sesiOn, es decir,
vuelvo a la pantalla del Login, se detienen los mensajes. y esto se repite cada
vez que entro y salgo.

Adjudico al final un ejemplo de la salida del dmesg por si requieren mas info.
Que Hice Mal???

-- 
"Tell me and I forget. Show me and I remember.
Involve me and I learn." -- Wise Man
------------ próxima parte ------------
Linux version 2.2.12-20 (root en porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:40:35 EDT 1999
Detected 233867806 Hz processor.
Console: colour VGA+ 80x34
Calibrating delay loop... 233.47 BogoMIPS
Memory: 127668k/131072k available (1008k kernel code, 412k reserved, 1640k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Klamath) stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch en atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb480
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD84AA, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC WD84AA, 8063MB w/2048kB Cache, CHS=1027/255/63
hdb: ATAPI 24X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :   519.684 MB/sec
   p5_mmx    :   545.973 MB/sec
   8regs     :   401.574 MB/sec
   32regs    :   225.171 MB/sec
using fastest function: p5_mmx (545.973 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 128480k swap-space (priority -1)
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
lp0: using parport0 (polling).
use procfs to enable interrupt-driven operation.
lp0: using parport0 (polling).
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
VFS: Disk change detected on device ide0(3,64)
------------ próxima parte ------------
-- 
Para desuscribirse, mande correo a: ayuda-unsubscribe en linux.org.mx
Para comandos adicionales, envíelo a: ayuda-help en linux.org.mx