[Ayuda] Fuentes en Gentoo

Vie Oct 1 20:34:24 CDT 2004

Bueno pues aqui esta mi configuracion, que la copie de mi partición de
fedora, mismas fuentes, misma resolución.. sin embargo no se ve igual..

Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard0"
    Driver	"kbd"
    Option "AutoRepeat" "500 30"

    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"es"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"
    Identifier	"Mouse0"
    Driver	"mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "no"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Monitor0"
    VendorName 	"ViewSonic"
    ModelName	"ViewSonic E771-4"
    DisplaySize	320	240
    HorizSync   30.0 - 70.0
    VertRefresh 50.0 -120.0
    Option	"dpms"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier	"Videocard0"
    Driver	"nvidia"
    VendorName	"Aopen"
    BoardName	"NVIDIA GeForce FX (generic)"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier  "Screen0"
    Device      "Videocard0"
    Monitor     "Monitor0"
    DefaultDepth 24

    Subsection "Display"
        Depth       16
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

    Identifier  "single head configuration"
    Screen 	0	"Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

> On Friday 01 October 2004 10:42, Tereso Ramos G wrote:
>> Despues de varios intentos, creo que finalmente tengo una instalación
>> estable de Gentoo, ya tengo instalado todo lo necesario... solo me
>> quedan
>> dos dudas.
>>
>> Mi pantalla no se ve muy fina que digamos, las fuentes no se ven
>> "suavizadas" tengo instalado xorg y gnome 2.6, ya le movi en las
>> propiedas
>> de las fuentes y nada, ¿Algún tip?
> Pasanos la configuracion de tu tarjeta en xorg.conf y que tarjeta tienes
> para
> ver si corresponde.
>
>> Y por otra parte, es normal que algunos paquetes no quieran compilar, o
>> algo estoy haciendo mal? (tengo problemas con acme, php 5 y otros).
> Si es normal ultimamente, las versiones mas nuevas (>3.3.2) dan algunos
> problemas con muchos paquetes, sobre todo los que son C++, pero no
> exclusivamente, ha estado cambiando mucho la sintaxis en gcc y eso ha
> hecho
> que muchos paquetes se "rompan", pero son pocos realmente, yo si tengo
> php5.0.1 sin problemas, lo que si no he logrado es xorg 6.8
>
> Saludos
> Max
>
> --
> Linux garaged 2.6.9-rc1-mm1 #3 SMP Mon Aug 30 12:14:50 CDT 2004 i686
> Intel(R)
> Pentium(R) 4 CPU 2.80GHz GenuineIntel GNU/Linux
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.12
> GS/S d- s: a-29 C++(+++) ULAHI+++ P+ L++>+++ E--- W++ N* o-- K- w++++ O-
> M--
> V-- PS+ PE Y-- PGP++ t- 5- X+ R tv++ b+ DI+++ D- G++ e++ h+ r+ z**
> ------END GEEK CODE BLOCK------
> gpg-key: http://garaged.homeip.net/gpg-key.txt
>
>
> _______________________________________________
> Ayuda mailing list
> Ayuda en linux.org.mx
> Para salir de la lista:
> http://mail.linux.org.mx/cgi-bin/mailman/listinfo/ayuda/
>

-- 
Powered by http://cazador.skypue.com

_______________________________________________
Ayuda mailing list
Ayuda en linux.org.mx
Para salir de la lista: http://mail.linux.org.mx/cgi-bin/mailman/listinfo/ayuda/